Click a picture for an enlarged view - Click again to shrink

Please scroll down for dimensions, more details and fitting instructions

PRICES INCLUDING UK VAT & POSTAGE

Supplied with all fittings, any selection of short, medium or long spindle lengths, hands and a full 12 month Guarantee !

Remember all our prices INCLUDE ! UK VAT and UK mainland postage

The price you see is the price you pay !

 

Please click here or on the quantity you require to order clock movements and plastic hands

 

SINGLE REPAIR PACKS ARE AVAILABLE BUT PLEASE READ THE NOTES BELOW !

5 movements with plastic hands and fittings only £12-50

10 Movements with plastic hands and fittings only £15

25 Movements with plastic hands and fittings only £30

50 movements with plastic hands and fittings only £50

100 movements with plastic hands and fittings only £75

250 movements with plastic hands and fittings only £175-00

500 or more movements with plastic hands and fittings ONLY 65 pence EACH !

 

Please click here or on the quantity you require to order clock movements and plastic hands

 

Scroll down for more details and fitting instructions

 

IF YOU ARE REPAIRING A CLOCK PLEASE NOTE:

Full instructions and dimensions of our clock movements are shown below
After ordering your movement you will be automatically transferred to our clock hands page
where all the hands we have are illustrated with their dimensions
The hands on your old clock will almost certainly not fit the new clock movement
so we supply a set of hands free with each clock movement

ALL OF OUR PRODUCTS AND ALL THE INFORMATION WE HAVE ARE ON THIS WEBSITE !

If after reading this you are not happy to attempt the repair or if you need more
information, or parts that are not shown please consult your local jeweller
We wish to point out (very politely!) that we are not clock repairers and we can not mend clocks
or discuss individual clock repairs over the phone !

 

IF AFTER READING THIS YOU ARE HAPPY TO PROCEED PLEASE ....

Click here to order a single repair pack with hands and fittings for only £10

 

 

Click here to return to the main menu

 

 

Movement dimensions

70mm high (with hanger) x 55mm wide x 16mm deep (without spindle)

The hanger can easily be removed with a hacksaw if you do not have room for it

The height if the movement without the hanger is 55mm

Centre hole needed in dial 8mm to 10mm

 

Choice of spindle lengths

Short spindle movements are ideal for dials up to 3mm thick

Medium spindle movements are ideal for dials up to 8mm thick

Long spindle movements are ideal for dials up to 12mm thick

You can choose any selection of spindle lengths you require

Ie.... 20 short 50 medium and 30 long spindle movements in a 100 pack

Please specify which spindle lengths you require when ordering

 

Click here to return to the main menu

 

 

Movement fixing instructions

The brass thread is on the movement spindle which makes assembly of the clock very easy and provides protection to the plastic spindle.

To make a clock simply drill an 8mm to 10mm hole in the dial.

Simply place the rubber washer (supplied) over the movement spindle and push the spindle through the hole from the back of the dial .

Place the brass washer (supplied) over the spindle. (This covers any small chips or ragged edges around the hole

Then just tighten the brass nut (supplied) on the thread until the movement is held firmly.

Choose any selection of hands you require from the hands list

Push the hour hand then the minute hand and then the second hand on to the spindle making sure they all point to the 12

Put in the battery (not supplied but available at superb prices) and that’s it - your clock will start !

 

Tip from the ticknology dept !

We always supply a second hand with each clock movement

If you don't want to use a second hand just separate the aluminium second hand from the brass bush

and push the brass bush on to the second hand spindle to neatly cover the centre hole

 

 

Click here to return to the main menu

 

 

IMPORTANT

OUR EZ CLOCK MOVEMENTS AND HANDS ARE RoHS APPROVED !

Since 1st July 2006 clock movements and hands have to be RoHS approved

by law if you want to sell your clocks in the EEC

Check with your supplier now !

Click here for more details on RoHS

 

 

Click here to return to the main menu