Please scroll down for more details and fitting instructions

 

Click here to view the hands you can choose from

 

 

Single Clock Repair Packs With Hands are also available but not on this page - Please ....

Click here for SINGLE QUARTZ CLOCK MOVEMENTS WITH HANDS AND BATTERY

 

 

 

 

CLOCK MOVEMENTS WITH YOUR CHOICE OF HANDS AND EXTRA LONG SPINDLE
PRICES FOR 5 OR MORE

(Without Batteries)

These extra Long spindle ticking movements are the same as our standard movements
but are ideal for dials up to 16mm thick

We have had them specially made as the small extra reach is often very useful

5 to 9 clock movements with hands £3-60 each

10 to 24 clock movements with hands £2-60 each

25 to 49 clock movements with hands £2-30 each

50 or more clock movements with hands £2-10 each

Remember ALL our prices include UK VAT and UK mainland postage

The price you see is the price you pay!

 

Scroll down for more details and fitting instructions

 

Quantity required   

 

When you have ordered your movements you will be taken to our hands page to select your hands

 

 

Click here for a printable copy of the instructions

 

 

Movement dimensions

70mm high (with hanger) x 55mm wide x 16mm deep (without spindle)

The hanger can easily be removed with a hacksaw if you do not have room for it

The height if the movement without the hanger is 55mm

Centre hole needed in dial 8mm to 10mm

 

Our Clock Movements are available in a choice of spindle lengths

The same fittings are used regardless of spindle length

Please click the pictures for a better view

 

These extra Long spindle ticking movements are the same as our standard movements but are ideal for dials up to 16mm thick

We have had them specially made as the small extra reach is often very useful

 

 

Movement fixing instructions

The brass thread is on the movement spindle which makes assembly of the clock
very easy and provides protection to the plastic spindle.

To make a clock simply drill an 8mm to 10mm hole in the dial.

Place the rubber washer (supplied) over the movement spindle and push the
spindle through the hole from the back of the dial

Place the brass washer (supplied) over the spindle. (This covers any small chips
or ragged edges around the hole

Then just tighten the brass nut (supplied) on the thread until the movement is held firmly.

Choose any selection of hands you require from theHANDS LIST

Push the hour hand then the minute hand and then the second hand on to the spindle making sure they all point to the 12

Put in the battery (not supplied but available at superb prices) and that’s it - your clock will start !

 

Tip from the ticknology dept !

We always supply a free second hand with each clock movement

If you don't want to use a second hand just order a metal second hand, separate the aluminium second hand
from the brass bush and push the brass bush on to the second hand spindle to neatly cover the centre hole

 

 

IMPORTANT

OUR EZ CLOCK MOVEMENTS AND HANDS ARE RoHS APPROVED !

Since 1st July 2006 clock movements and hands have to be RoHS approved

by law if you want to sell your clocks in the EEC

 

 

Click here to return to the main menu