Choose from Short, Medium or Long spindle and Gold or Silver hands
SORRY - BLACK 192mm HANDS OUT OF STOCK
Full details and instructions below
If you would like to see these please Click Here
Standard High Torque clock movements
Click the picture for a better view - click again to reduce
Extra Strong Sweep Quartz Clock Movements with Long 192mm
Gold or Silver Metal Clock Hands and End Cap
SORRY - BLACK 192mm HANDS OUT OF STOCK
(Second hands are not recommended for use with hands as large as this)
High Torque clock movement prices
Single High Torque Sweep Clock movement repair pack with 192mm Black, Gold or Silver Metal hands
£15
5 to 9 High Torque Clock movements with 192mm Black, Gold or Silver Metal hands £6 each
10 High Torque Clock movements with 192mm Black, Gold or Silver Metal hands £5 each
Please phone for prices of higher quantities
Remember all our prices include UK VAT and UK mainland postage
The price you see is the price you pay !
High Torque Clock Movement dimensions
70mm high (with hanger) x 55mm wide x 16mm deep (without spindle)
The hanger can easily be removed with a hacksaw if you do not have room for it
The height if the movement without the hanger is 55mm
Centre hole needed in dial 8mm to 10mm
Our High Torque Sweep Clock Movements are available in a choice of spindle lengths
The same fittings are used regardless of spindle length
Please click the pictures for a better view
Short spindle movements are ideal for dials up to 3mm thick
Medium spindle movements are ideal for dials up to 7mm thick
Long spindle movements are ideal for dials up to 10mm thick
Click here to return to the main menu
Movement fixing instructions
The brass thread is on the movement spindle which makes assembly of the clock
very easy and provides protection to the plastic spindle.
To make a clock simply drill an 8mm to 10mm hole in the dial. All our dials are
supplied with a 10mm hole.
Simply place the rubber washer (supplied) over the movement spindle and push the
spindle through the hole from the back of the dial .
Place the brass washer (supplied) over the spindle. (This covers any small chips
or ragged edges around the hole
Then just tighten the brass nut (supplied) on the thread until the movement is
held firmly.
Push the hour hand then the minute hand on to the spindle making sure they both
point to the 12
Apply the end cap
Put in the battery (not supplied but available at superb prices) and that’s it -
your clock will start !
Click here to return to the main menu
ALL our prices include UK VAT and Postage
The price you see is the price you pay - and our minimum order is only £10!
You can then checkout and pay securely online or you can order online and
phone us with your card details if you prefer
We use Worldpay to securely process Maestro, Visa, Mastercard, JCB and American Express payments
PayPal payments are also welcomed
Our email address is sales@clockparts.co.uk
Please note - We operate strictly by mail order only
We do not have a shop or any facilities for visitors so we are unable
to make up orders while you wait or for collection
You can print an order form with the link below and post it to us
Click here if you would like to print an order form
You can fax your order to us on 01288 381255
Click here if you would like to print an order form
You can email us at sales@clockparts.co.uk
Please don't send your credit card details in a clear email
It is much safer to use our shopping cart or phone us
Additional Delivery Options
Next working day delivery to most UK post codes by Fedex
(when your goods are ready) for only £7.50
Please note this will not guarantee same day despatch of your order but it will save time on delivery
We can not guarantee immediate despatch of your order as many of our products are made to order
but if you need your goods urgently please phone and we will always do our best to help
Manufacturers, importers and distributors of clock materials since 1979
Where service comes first and price comes second - to none!
We are always closed for Easter week, Christmas week
and August bank holiday week